|
Saw Blades
For Band and Trim Saws |
Diamond
Blade
37.7" (96cm)
Diamond blades are diamond coated
for wet sawing stone, marble, tile,
ceramic, and other mineral based materials. |
Inland
carries a range of blade types for
our DB-100 BandSaw to fit any sawing
need!
Use
the WoodCut™ blade to saw most types
of woods and wood composites.
The MetalCut™ Blade saws non-ferrous
metals, plastics, leather and similar
materials.
Key
Features :
Diamond
blades have the finest quality diamond
crystal
The
diamond is bonded to stainless steel
using techniques developed and proven
for over two decades.
Designed
for maximum sawing smoothness and
speed.
|
Price:
$64.95
|
|
37.7"
(96cm) WoodCut Blade
|
Inland
carries a range of blade types for
our DB-100 BandSaw to fit any sawing
need!
Use
the WoodCut™ blade to saw most types
of woods and wood composites.
Key
Features :
Blades
are cut on precision equipment
Blade
tooth shape, angle, and sharpness
are true to each other within .003".
Designed
for maximum sawing smoothness and
speed.
Blade Length: 37.7" (96cm .022" wide
blade with approximately
0.32" of kerf
.130" deep
|
Price:
$17.95
|
|
37.7"
(96cm) MetalCut Blade
|
Inland
carries a range of blade types for
our DB-100 BandSaw to fit any sawing
need!
The
MetalCut™ Blade saws non-ferrous metals,
plastics, leather and similar materials.
Key
Features :
Cut
on precision equipment.
Blade
tooth shape, angle, and sharpness
are true to each other within .003"
Designed
for maximum sawing smoothness and
speed.
|
Price:
$17.95
|
|
6
½" x .020" Trim Saw
Blade - Standard
|
Inland
carries a range of blade types to
fit any sawing need!
Our
standard DiamondTuff™ blade has a
substrate thickness of .020" and is
suitable for cutting hard materials
like agates where the price of the
material is generally low and material
loss is not very important.
Key
Features :
All blades are crafted from
hardened and tempered, high-carbon
spring steel.
Arbor
holes are cut within minus .0000"
and plus .00075" tolerance.
Standard
blade has diamond substrate thickness
of .020"
Diamond
coated blades contain genuine diamond
crystals bonded to the perimeter using
techniques developed and proven for
over two decades.
½" (1.27 cm) arbor hole
|
Price: $27.95
|
|
6
½" x .012" Trim Saw
Blade - ThinCut™
|
Inland
carries a range of blade types to
fit any sawing need!
This
ThinCut™ DiamondTuff™ blade has a
substrate thickness of .012" and is
a good "in between" blade for semi-precious
materials and where the cutting detail
needs to be finer.
Key
Features :
All blades are crafted from
hardened and tempered, high-carbon
spring steel.
Arbor
holes are cut within minus .0000"
and plus .00075" tolerance.
Blade
has diamond substrate thickness of
.012"
Should
not be used at reduced motor speeds,
as the rpm helps to maintain the blade's
straight cut.
½" (1.27 cm) arbor hole
|
Price: $27.95
|
|
6
½" x .008" Trim Saw Blade
Extra ThinCut™
|
Inland
carries a range of blade types to
fit any sawing need!
This
ThinCut™ DiamondTuff™ blade has a
substrate thickness of .008" and is
a very delicate blade to be used on
the most costly of materials and where
material loss must be kept to an absolute
minimum.
Key
Features :
All blades are crafted from
hardened and tempered, high-carbon
spring steel.
Arbor
holes are cut within minus .0000"
and plus .00075" tolerance.
Standard
blade has diamond substrate thickness
of .008"
Should
not be used at reduced motor speeds,
as the rpm helps to maintain the blade's
straight cut.
½" (1.27 cm) arbor hole
|
Price: $27.95
|
|
MetalCut
6 ½" Trim Saw Blade
|
Inland
carries a range of blade types to
fit any sawing need! The MetalCut™
blade for the SwapTop™ Trim saw is
made to saw non-ferrous metals, plastics,
leather and similar materials.
Key
Features :
All blades are crafted from
hardened and tempered, high-carbon
spring steel.
Arbor
holes are cut within minus .0000"
and plus .00075" tolerance.
Toothed
blades are cut on precision equipment.
Blade
tooth shape, angle, and sharpness
are true to each other within .003",
for maximum sawing smoothness and
speed.
½" (1.27 cm) arbor hole
|
Price: $19.95
|
|
WoodCut
6 ½" Trim Saw Blade
|
Inland carries a range of blade types
to fit any sawing need! The WoodCut™
blade for the SwapTop™ Trim saw is
made to saw to saw most types of woods
and wood composites.
Key
Features :
All blades are crafted from
hardened and tempered, high-carbon
spring steel.
Arbor
holes are cut within minus .0000"
and plus .00075" tolerance.
Toothed
blades are cut on precision equipment.
Blade
tooth shape, angle, and sharpness
are true to each other within .003",
for maximum sawing smoothness and
speed.
½" (1.27 cm) arbor hole
|
Price: $19.95
|
|
| |
| |
| |
|
|
